• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

The Home Cutter

Discuss Different Types of Home Product

  • Home
  • Welder
    • Best Mig Welder Under 1000 – Top 5 Picks & Reviews
    • Top 5 Best Mig Welder Under 500 in 2020
    • Best Flux Core Welder For The Money – Top Picks & Reviews 2020
    • Best 120v Welder in 2020: Reviews & Buying Guide
    • Best Welder Cord Reviews 2020 – Welding Cords of the Market
    • Top 5 Best Welding Table In 2020: Trusted Reviews & Buying Guide
    • Top 5 Best Budget Welding Helmet 2020:Reviews & Buying Guide
  • plasma cutter
    • Best Plasma Cutter Under 500 For 2020: Trusted Reviews
  • Brands
    • 5 Best Hobart Welders Reviews [In-Depth] – 2020 Edition
    • Hobart 210 MVP Review: Awesome MIG Welder Review In 2020
  • Blog

5 Best Plasma Cutter Under 1000 In 2020 – Updated

April 6, 2020 by Charles Mora Leave a Comment

A plasma cutter makes the ideal addition for fully equipped metal shop that can handle projects of any size. This ingenious tool makes short work of a variety of materials and gives your workmanship the accuracy and flexibility needed to greatly extend your output.

Plasma cutters should not be confused with welders, though as a metal worker you may be using both. A plasma cutter uses a super-energized cloud of electrons to make precise cuts in a variety of metals including steel, aluminum, copper and brass. Energy is supplied by mains electricity at either 110 or 240 volts which means you don't have to haul gas bottles around. Better still the best plasma cutter under 1000 run using compressed air for maximum convenience. Modern units are usually portable meaning you can put your plasma cutter to work on a range of projects including plumbing, fabrication and auto shop work. Plasma cutters are great as they leave cut surfaces ready for welding or other finishing. 

Here are our top picks for the best plasma cutter under 1000

1.Lotos LTP5000D Pilot Arc Plasma Cutter, Dual Voltage

This entry level product is an ideal pick for a variety of hobbyist projects that can be completed with professional flair. The plasma cutter is able to cut both thick and thin metals including copper, aluminum and various types of steel.With a 30% duty cycle, this unit is only up to home or hobbyist use. Users, who are largely hobbyists, are pleased with this unit but it is slow to cut.

Lotos LTP5000D Pilot Arc Plasma Cutter, Dual Voltage review

Key Product Features Primeweld NonTouch Air Inverter Plasma Cutter

●½ inch clean cut
●Dual voltage 110 or 220 Volt
●Product weight 28 pounds
●Product dimensions 18 by 14 by 11 inches
●High frequency starting arc
●3-year warranty


In conclusion
Experienced metalworkers report that this plasma cutter delivers consistent performance, but it is the customer service that is highly rated for this product, with prompt replacement of defective units and responsive support.

Check Price Now 

2. Primeweld NonTouch Air Inverter Plasma Cutter

This unit is a great pick for cutting a variety of metals including steel, iron, copper, aluminum and more with minimal slag. The ½ inch clean cut works on metal of a variety of thicknesses and even rusty, scrap and painted metals.

This is a compact unit with carrying handle and comes with accessories including cabling, ground clamp, air hose and regulator. Reviews are generally positive but defective units have been reported to throw up problems like cracked or broken ceramic cone tips or a hot or damaged handle.

Primeweld NonTouch Air Inverter Plasma Cutter review

Key Product Features Primeweld NonTouch Air Inverter Plasma Cutter

●½ inch clean cut
●Dual voltage 110 or 220 Volt
●Product weight 28 pounds
●Product dimensions 18 by 14 by 11 inches
●High frequency starting arc
●3-year warranty


In conclusion
Experienced metalworkers report that this plasma cutter delivers consistent performance, but it is the customer service that is highly rated for this product, with prompt replacement of defective units and responsive support.

Check Price Now 

3.IPT60 Torch Plasma Cutter by PRIMEWELD

This single function plasma cutter delivers competitive performance that can tackle rusted, old and expanded metals. The rugged casing is portable with a carry handle and it's performance and duty cycle make it adequate for a professional shop.


Controls and digital display are solid and connecting parts fit securely. Pro users rate this product positively, particularly the generous warranty and solid customer support from PRIMEWELD. Users do report that torch parts will wear quickly with prolonged use.

IPT60 Torch Plasma Cutter by PRIMEWELD

Key Product Features of IPT60 Torch Plasma Cutter

●No touch starting
●60% duty cycle
●Dual voltage with 110 or 220 Volt settings
●Product weight is 55 pounds
●20 x 11 x 19 inches dimensions
●Italian-made IPT 60 torch head
●3 year warranty and customer support


In conclusion.
This is a hardy plasma cutter that adds utility to your shop. You can buy with confidence from PRIMEWELD due to their generous warranty and highly rated customer support.

Check Price Now 

4. 3 in 1 Plasma Cutter by PRIMEWELD

This unit delivers great value for such a low price as it combines both plasma cutting and welding functions in one handy unit. It is ideal for amateur or hobbyist fabrication, and has all the attachments to get started right out of the box. The plasma cutter setting cuts through a variety of metal types and thicknesses. Hobbyists love it have have given great reviews. The unit also appears to offer reliable performance over time too.

3 in 1 Plasma Cutter by PRIMEWELD

Key Product Features of 3 in 1 Plasma Cutter

●3 in 1 function for outstanding value:
○50 amp Plasma cutter
○TIG welder of 200 amps
○Stick welder of 200 amps
●60% duty cycle
●Portable
●Weight: 32 pounds
●Dimensions:23.6 by 16.8 by 12.8 inches
●3 year warranty


In conclusion
This is the plasma cutter under 1000 bucks delivers a great 3 in 1 function with great duty cycle for all sorts of projects.

Check Price Now 

5.SUPER DEAL DC Inverter Plasma Cutter

This solid unit is competitively priced and delivers faster and more accurate cutting than the average flame cutter. Its compact portable unit comes with torches cabling and everything needed to plug and play with regular household power.

SUPER DEAL DC Inverter Plasma Cutter

Key Product Features of SUPER DEAL DC Inverter Plasma Cutter

●½ inch clean cut
●Dual voltage 110 or 220 Volts
●60% duty cycle
●Product weight 22 pounds
●18.5 x 11 x 13.5 inches product dimensions


​In conclusion
This is a very cheap plasma cutter and offers great value for the amateur who wants to give it a go. However product failures are reported, so a more expensive model may be better if you are looking for prolonged service.

Check Price Now 

Find your best plasma cutter under 1000 dollars with our handy and helpful buyer's guide.

1000 bucks is plenty to get yourself a heavy duty plasma cutter that will tackle everything you throw at it. You want hard-wearing, performance machinery that does not let you down on the job. Plasma cutters generally excel for metal cutting above plasma cutter alternatives like:
●oxy-fuel
●laser cutting
● water jet cutting
The convenience is also a great benefit of these units as well as knowing that you have everything to cut and even weld (in some cases) in one place. An added benefit is the relatively low operating costs compared other metal cutting methods.

What price should I be paying for a good quality plasma cutter?

Clearly, you don't need to fork out the tens of thousands of dollars needed for an industrial CNC powered plasma cutter. A basic unit should be available easily for between $500 to $1000. At this kind of price point you should expect some of the features we expand on below.

What kind of performance does a professional metal worker need from their plasma cutter?

Welders and other metalworking professionals will need a plasma cutter with competitive operating costs, high cut quality, precision and the rate of production you can achieve with the unit. 

3 key plasma cutter features to look out for the best plasma cutters under 1000.

1. Combi units deliver excellent value for money and combine multiple metalworking functions alongside the plasma cutter. Functions typically include:
●Plasma cutter
●TIG welder
●Stick welder
●ARC MMA welder
A combination 3 in 1 plasma cutter means that you can both cut and weld metals for complete fabrication.

2.Long duty cycle. Duty cycle is a measure of the percentage of continual performance your plasma cutter can deliver in a 10 minute period. Longer duty cycle means less downtime and more productivity with your tool.

3.Portability is important for metalworking contractors who need to take their equipment with them to work on construction sites. A lightweight yet robust unit can be carried with confidence over the shoulder.

Frequently Asked Questions(FAQ)

1.What safety gear do I need for my plasma cutter?

As with other forms of metal work, personal protective equipment (PPE) is essential. You will need to ensure you have the following gear:
●Helmet
●Goggles
●Bandana
●Gloves
●Face mask
●Aprons and jackets
●Safety footwear

2.What is the ideal power supply for a plasma cutter?

Plasma cutters benefit from a 200-240 volt DC power supply. The DC current aids the maintenance of the plasma arc while cutting.

3.What type of start is best for my plasma cutter?

There are several ways in which a plasma cutter arc can be started but the main two in these types of cutter are:
●Contact
●High frequency
Of the two contact start is considered safer and simply starts the plasma cutter arc by contact of the cutter torch with the conductive metal to be cut.

High frequency starting plasma cutters use a high frequency and high voltage circuit to kick-start the cutting process which can be risky and even cause electrocution, but most commercial units will be safe and suitable for correct use. 

Rounding up.

It's great that a plasma cutter can be sourced for your home or business metalworking for best plasma cutter under 1000. Despite the competitive prices, we are impressed at the performance of these tools and reviews by industry pros mean that you have the assurance that these plasma cutters are really up to the job. At this price point there are also better warranties and customer support, which are well worth taking advantage of. As always it is not just the equipment but how you use it that will get the best results and keep you safe. Ensure you apprise yourself fully on how your chose cutter works before switching it on.

Filed Under: plasma cutter, Reviews

Top 3 Best Welding Rod for Cast Iron in 2020: Buyers Guide

April 4, 2020 by Charles Mora Leave a Comment

Welding rods form the core of any metalwork undertaking. They are the ones that melt and thereby furnish the metals in the fusion welding undertaking. Owing to their significance, you can never gamble at all insofar as finding the most appropriate rod for your use is concerned.

We have prepared this review-cum-buying guide to help you out. In our review, we shall look into the best welding rod for cast iron that money can buy at the moment. At the same time, we shall consider the factors that inform the most appropriate purchase of the rod of this kind.

Buyers Guide of Best Welding Rod for Cast Iron

To be able to find the most suitable welding rod, you have to care for certain issues. We look into the here below:

Temperature Ratings
Different welding tasks require different temperature ratings. You have to match these two for the sake of better operations and final outcomes. This requires that you study the two first and foremost before proceeding to make a suitable purchase for yourself. Be mindful of your utility budget while at it too.

Desired Degree of Permanence
How permanent would you wish that the outcomes endure? Those outcomes that are to be too permanent ought to make use of rods that may similarly endure higher temperatures. That is because higher heat levels have the tendency to leave behind equally permanent outcomes.

Operational Expertise
This refers to the manner in which the rods are engaged and deployed for use. You want to choose a rod that is simpler to engage in. That calls for you to assess your own competence first, before proceeding to find that one which blends the same expertise.

Top 3 Best Welding Rod for Cast Iron

1. Forney 30705 E7018 Welding Rod, 3/32-Inch, 5-Pound

Looking for a rod to use in just about every other position? This is the one we would vouch for. It operates principally by the use of the low hydrogen and alters its position appropriately to manage all forms of welding activities. You will find it particularly suited for those activities that require low penetration.

High Heat En​durance

Owing to its high heat endurance, the rod is capable of facilitating the welding of steel and those projects that involve the thick sections, cracking issues, and the restrained joints. Nonetheless, the rod is not recommended for those power sources with low open circuit-Voltage OCV.

Forney 30705 E7018 Welding Rod

Highlighted Features Forney 30705 E7018 Welding Rod

•All position welding
•Mild steel "low hydrogen"
•Diameter (inches): 3/32"
•Weight lbs.: 5
•Tensile strength (PSI): 84, 000
•Amperage: 65-100

Conclusion:
On the account of its sheer strength, the rod is also good enough for a variety of purposes that center on metalwork and fabrications. You will indeed find it a great companion for your general-purpose AC applications, and those tasks that demand low penetration. What’s more? It may also be used on DC+!

2.Forney 30305 E6013 Welding Rod, 3/32-Inch, 5-Pound

Simplistic Operations

Never attempted to use these rods before? Get hold of this one and make your work better. Why, you may ask? The rod is pretty easy to use. It comprises simpler and less sophisticated parts to enable this. Owing to its simplicity, the rod is also suitable for those applications that demand shallow penetrations.

Excellent Wetting Actions

When applied concisely, the rod does manage excellent wetting actions a fact that goes a long way in yielding smooth and flat beads. Its versatile nature sees it handle both the AC and the DC applications in equal stature. A number of benefits also accrue from the use of this rod.

Forney 30305 E6013 Welding Rod, 3/32-Inch, 5-Pound

Highlighted Features Forney 30305 E6013 Welding Rod:

•3/32-Inch/2.38 mm rod diameter
•5-Pound/2.26 kg
•6013 Tensile strength is 60,000
•PSI Amperage 40-80 amps AC
•All-position welding
•Excellent wetting action
•Low spatter

Conclusion:
It displays exceptional slag removal and virtually ‘cleans itself’ after a welding spate. Its moderate heat output makes it a good one to use on all kinds of mild steel that require relative ease of operations. If you use it just right, you may be sure to achieve some good appearances.

3. Forney 31205 E6011 Welding Rod, 1/8-Inch, 5-Pound

Deep Penetration

Wanting to tackle some deep penetration welding activities? Look to no other rod than this one! It is by far the most powerful and well able to manage the deeper penetration activities that a rod of its stature demands. To add to that, it also handles those rusty, dirty and painted surfaces pretty fine.

Smooth Arc Wetting

Upon being activated, the rod discharges smooth arc wetting and spreads out the heat uniformly. It also displays great spatter not to mention providing faster deposition of the heat output. Some flatter contour fillets do exist to provide comparatively faster travel speeds.

Forney 31205 E6011 Welding Rod

Highlighted Features Forney 31205 E6011 Welding Rod:

•Smooth arc wetting and spread
•Super sixty
•Buzz box
•Stick welding
•SMAW
•AC/DC
•Oxy-fuel
•Plasma
•MIG
•TIG

Conclusion:

Unlike many competing rods in the market at the moment, this one does not demand hefty surface preparation right before use. That stems from its ability to take on just about any other surface with ease. This makes it pretty suited for the galvanized steel and general maintenance applications.

Frequently Asked Question (FAQs)

Q1. Can you weld cast iron with 6011 rods?

A. YES, you can! This metal serves as a melting base while at the same time comprises some mild steel. On accounts of these two, it allows you to weld the cast iron.

Q2. What type of welding rod is used for cast iron?

A. Two main kinds of welding rods may be used for the cast iron. These are the pure Nickel and the Ferro-Nickel respectively. The former is softer and more malleable whereas the latter is cheaper to come by.

Q3. Can you weld cast iron to cast iron?

A. Yes, it is! However, it is quite difficult to do so. Many a time, this approach is mainly used to repair rather than join two casts to their members.

Q4. Why is cast iron welding difficult?

A. Cast iron does have a high Carbon content that consumes huge quantities of heat to prepare for welding. Upon heating, it also tends to cool too fast while at the same time forming hard and brittle structures.

Q5. Can you weld cast iron with mild steel rods?

A. Yes, it is possible for you to do so! Given their dissimilar natures, they require varying heating temperatures that similarly complicate the processes of welding.

Conclusion

Our look into the best welding rod for cast iron comes to an end there. It is now our hope that you have the ammunition you need to make a nice selection going forward. Just reiterate an earlier point, finding the most suitable rod is not an issue you can take lightly.

The choice you make will no doubt determine to a large extent the kind of experience you will subsequently obtain. Prioritizing the three welding rods we have reviewed above is one sure way of making the most profitable choice. Why not move with haste now and make a choice as soon as can be?

Filed Under: Reviews, Welder

Hobart 210 MVP Review: Awesome MIG Welder Review In 2020

April 2, 2020 by Charles Mora Leave a Comment

Hobart is a household name when it comes to welding business. The company has been around for more than a century and is well known for manufacturing high-quality welding products. If you are a DIY enthusiast looking for a welding machine, then you must have come across Hobart 210 MVP. This MIG core welder is among the best-selling welder on the market today. Its incredible power, compact design, reliability, and durability are some of the reasons why many welders prefer this machine. In this Hobart 210 MVP review, we are going to discuss in-depth everything you need to know about this welding machine to help you determine whether it is the right device for you.

Hobart 210 MVP Review

Hobart 210 MVP is a compact welding machine designed to help you perform your welding tasks with ease and with minimal energy. It features an integrated spool gun circuitry that enhances the secure connection to the spool runner MIG gun without requiring you to use an additional control, box or adapter. 

The welder is also capable of running both on 115V and 230V depending on the task at hand. Its maximum power (140 amps) will allow you to weld 1/8 inch concrete steel on a single pass. Additionally, the machine is incredibly easy to switch between the two voltage

Hobart 210 MVP review

Hobart 210 MVP review

Product Features of Hobart 210 MIG Welder: 

· Dual voltage input

  • Hobart 210 MVP is designed to do the hard jobs. The two voltage output that it is equipped with means that you can choose a voltage out that suits the job at hand. For instance, if you want to perform heavy demanding tasks, you can switch to 230V output. On the other hand, if you want to perform light household jobs, then you can use the 115V output.

· Built-in spool gun control circuitry

  • This feature helps you to prevent feeding issues especially when welding soft aluminum wires

· Weight

  • This welder weighs about 79 pounds meaning that it is quite heavy. To transport it, you need to use a wheeled cart to make movement easy.

Hobart 210 MVP features in a nutshell:

  • Seven position voltage control at 230V and four-position voltage control at 115V
  • Built-in safety features including motor protection and thermal overload
  • Internal storage areas
  • Dual gauge regulator
  • Slopped control panel
  • Cast aluminum drive system
  • Dual groove drive rolls
  • Built-in spool gun control circuitry

Pros

  • •It is ideal for both home and construction sue
  • •It is made in the USA
  • •It is durable
  • •Wire feed is smooth and does not jam
  • •User friendly hence ideal for beginners
  • •Equipped with excellent safety features
  • •Easy to set up
  • •Energy efficient
  • •Easy to switch between the two voltage

Cons

  • •Not ideal for heavy-duty work
  • •Does not have TIG function
  • •It is quite heavy hence requires a wheeled cart

Buyers guide- what to cons​​​​​ider when buying a welding machine

· Consider brand

This is one of the most important factors to consider when buying a welding machine. Currently, many brands manufacture welding machines. However, there are some brands like Hobart that have proven to manufacturer high quality, reliable and durable welders. When buying a welding machine, by from a brand that has been around and has countless loyal customers like Hobart. Also, by from a brand that gives warranty and their products have excellent customer reviews and ratings.

· Consider intended use

Before you go shopping for a welding machine, you should know its intended use. This will help you purchase a welding machine with features that suit its use. For instance, if you planning to buy a welding machine for automobile repair, then it is wise to choose one that is portable.

· Consider thermal overload protection

This is a very important factor that many people usually overlook when purchasing a welder. This feature helps to protect the machine from producing excessive heat that may compromise its efficiency.

· Consider input voltage

You don’t want to purchase a welder only to find out later that it doesn’t suit the task at hand. So, before you make your final choice, check the welder’s input voltage to see if it will enable you to perform your tasks efficiently. Most automobile repair and home renovation welders have a voltage that ranges from 100V - 250V.

Comparison Table of Hobart 210 MVP Vs Hobart 190 MVP

Features

Hobart 210 MVP

Hobart 190 MVP

Power

Compatible with 115V and 230V

Operates only on 230V

Metal thickness capacity

3/8 inch metal beams

5/16 inch metal beams

Duty cycle

20% duty cycle on 115V at 90A and 30% on 230V at 150A

30% at 130A

Weight

Weighs 79 pounds

Weighs 68 pounds

Frequently asked questions (FAQ)

Are Hobart welders any good?

YES, Hobart welders are among the best-selling welders in the USA. The company has been around for more than a century had has proven beyond doubt to manufacture higher quality welding machines.

How do you set up a MIG Hobart Welder?

Move the fume extractor to the welding area

1. Attach a ground clamp

2. Open the cylinder using the hand wheel.

3. Adjust the screw

4. Set the right welding setting

5. Turn on the welding machine

6. Adjust voltage and wire-speed

7. Start to weld

How do you use a Hobart welder?

Using Hobart 210 MVP is quite easy. All you need to do is plug the machine to the wall socket, adjust voltage and wire speed then begin to weld.

Which one is better Lincoln or Hobart Welders?

It depends on the features that you are looking for. Both Lincoln and Hobart have their strengths and weaknesses. For instance, Hobart gives better results when welding aluminum. Additionally, Hobart has a wider welding output

Final verdict

If you are looking for a powerful, energy-efficient and durable welder to enable you to perform your home welding tasks with ease, then look no further then Hobart 210 MVP review. This device is equipped with many great features that will make your welding tasks fun and easy to perform. It is also affordable and durable.

Filed Under: Brands, Reviews

Best 120v Welder in 2020: Reviews & Buying Guide

April 1, 2020 by Charles Mora Leave a Comment

Doesn’t matter if you’re a regular guy or a professional, if you deal with welding, you surely need one hell of a device that takes your experience on its pinnacle. Imagine the low-end devices that don’t do you any good. All you do is just waste your money. We prefer the welders that come with 120 volts.

These devices will allow you to get your job done. All you need to do is get the best 120v Welder and you’ll know what it feels to have mind boggling welding experience.However, getting the perfect product is not easy. At least, it gets way too tough when you have all those junks in the marketplace. No worries, we’ll guide you to the top 5.

Top 5 Best 120V Welder Reviews

Below are the top 5 welders we’re suggesting. Read these reviews and see which one suits you the best.

1.Forney easy weld 298 arc welder Review

For doing a variety of tasks in a better way, Forney Easy Weld 298 Arc Welder may be a good choice for you. You can complete different projects by this arc welder. Let's go in detail.

The product comes with the inverter power system. This system is able of an output of 90 amp and 120V input, that will provide you a smooth arc. It comes as a lightweight mig welder, which is about 13.74 pounds

Flexibility is the key to buy the best 120V arc welder, this welder has got it. Forney 298 comes with a 6-inch electric cord, so it gives you to weld in almost any place in your home or even outdoor.

Forney Easy 298 is competent with a TIG (Tungsten Inert Gas) system. But you have to achieve that individually.

You can use an extent of 16 gauge to 5/16 inches thickness. Also, it is made with a high-quality metal exterior, which ensures the ultimate durability.

It can handle up to 1/8 inch rod and it has a built-in handle to facilitate your transportation.
You don't have to spend extra amounts to purchase a battery, because there is no need for this. Just use the electricity and run the mig welder.

Forney easy weld 298 arc welder Review

Forney easy weld 298 arc welder Review

Highlighted features Forney 298 arc welder:

  • 120V input along with 90 amp output.
  • 13.74 pounds.
  • 6-inch electric cord.
  • Compatible with a TIG system.
  • 16 gauge to 5/6 inches thickness.
  • A high-quality metal exterior.
  • It can handle 1/8 inches rod and also has a built-in handle.
  • No need to buy any battery.
  • Conclusion:
    Knowing all these things, you might assume that this product will help you a lot in performing your desired task. It is durable, affordable and much more flexible compared with other arc welders. So, what's the delay to buy the best mig welder for the money?

    2.S7 ARC Welder Machine

    S7 ARC Welder Machine is one of the best tig welders without any doubt. It is made for professionals or qualified personals, who have incidental knowledge.

    It is known as a powerhouse! Because it comes with both the 110V and 220 V along with 200A for providing the best power supply.

    The welder machine arrives with the IGBT inverter technology along with the unique control mode that is susceptible to welding stainless steel, mild steel, weld steel, carbon steel or cast iron.

    S7 ARC Welder Machine is made with a good quality iron. Besides, it comes with 3 different colors which are grey, yellow, yellow and grey. We think it can catch one's eye.

    Energy-preserving power is the main achievement of this welder machine. Surely, it minimizes the damage of iron and copper. The system raises the welding frequency. So, entire day welding is not even an issue!

    To perfectly match welding current, it has over-current protection, over-heating protection and also over-voltage protection.

    The size of this machine is about 16.2 x 13.2 x 8.5 inches and the item weight is 13.15 pounds. See, it is compact and lightweight. 

    S7 ARC Welder Machine

    S7 ARC Welder Machine

    Highlighted Features S7 ARC Welder Machine:

    •It has both 110V and 220V along with 200A.
    • IGBT inverter with unique control mode.
    •Good quality iron body with 3 different colors.
    •Energy- preserving power.
    •Multiple protections.
    •A compact and lightweight design.

    Conclusion:
    S7 ARC Welder Machine is easy for storage, compact and good examples of versatility. Here are many more arc welders in the market. But if you want to purchase a welder machine to easily perform multiple tasks, your first and foremost choice will be S7 ARC Welder Machine. 

    3.Arc Welder Dual Voltage 110v-220v Welding Machine

    If heavy-duty construction and functionality are what you are hungry for, Arc Welder Dual Voltage is what you should be searching for. Let's dive in.

    It has a dual voltage control mode to maximize the better power supply. It comes with both the 110V and 220V along with the 200A.

    Arc Welder Dual Voltage is not only a welder machine but also a work of art. This is suitable for the whole day working system by 3.2 mm rods.

    It is suitable for beginner or novice person. It can be used for doing small welding activities and for practicing. You can say that it is the ease of use.

    The tig welder is appropriate for welding carbon steel, medium carbon steel, alloy steel and many more.

    The best thing is, it enters with a bearable design. Approximately, the weight is 11.75 pounds as a lightweight welder. Also, the dimension is about 16 x 13.4 x 6.2 inches, which is compact and ideal.

    Arc Welder Dual Voltage can save power up to 30% to 70%. That's why it is considered as the king of energy saver.
    To defend the unit from harm or damage, it has anti-stick protection and thermal overload.

    Arc Welder Dual Voltage 110v-220v Welding Machine

    Arc Welder Dual Voltage 110v-220v Welding Machine

    Highlighted features Arc Welder:

    •110V and 220V along with 220A.
    •3.2 mm rods.
    •Perfectly compatible with beginners or novice persons.
    •Made for multiple welding.
    •Compact and lightweight.
    •Save power up to 30% to 70%.
    •Anti-stick protection and thermal overload.

    Conclusion:
    Because of all these qualities, Arc Welder Dual Voltage is the 120v mig welder in the market. If you are a beginner level or want to learn welding work, then this machine may be your final choice.

    4.Kicking Horse F130 Mig Welder

    Kicking House F130 Mig Welder arrives with everything that is needed to meet your requirements. Let's take a look.

    Here you can fine-tune the voltage of this welder, where another has adjusted heat setting. No need to be panic anymore! Because it has a Dial-out mechanism for regulating the weld smoothly and efficiently.

    You can take your Kicking House F130 Mig welder wherever you need. Because it is very light compared with typical welders, only 10.8 pounds.

    Even you don’t have to face any kind of accident. As, it has extra over-voltage, over-load and over-heating sensors for ultimate privacy. 100% safer option for you to use at home or anywhere.

    The best thing is, Kicking House F130 Mig Welder comprised of an inverter. It can save your energy bill by nearly 25% which is great!

    The immensely compact design would not be an obstacle to adapt the method by a new-come. For offering the highest power, it needs a low maintenance level.

    Kicking Horse F130 Mig Welder

    Highlighted Features Kicking Horse F130 Mig Welder:

    •Infinite voltage control.
    •Only 10.8 pounds.
    •100% safer option.
    •Save bills by nearly 25%.
    •Easy to set up and simple to use.

    Conclusion:
    If you are a beginner or a newbie, Kicking House F130 will be the best option for you. You can save energy bills, carry easily and use this welder in your way. So, No need to be confused as you have Kicking House F130!

    5.ZENY Arc Welding Machine

    Are you searching for a unique looking product as well as the best functionality? Then you may take a look at ZENY Arc Welding Machine.

    For the excellent power supply, it has a dual input voltage which is 115V/230V and the highest output of 160A. Also, it has a digital display for showing you the exact value of the current.

    This arc welder is better for different welding like mild steel, aluminum steel, stainless steel, and other heavy materials as well.

    You can carry the welder by its handle. Besides this, it has got an extra belt as well. So, you can take it upon in your shoulders or carry it as a bag.

    Because of its size, you can take it wherever you like. It's just about 18 lbs.

    ZENY Arc Welding Machine has three types of protections for conclusive security. They are over-pressure protection, over-current protection with heat dissipation design and over-heat protection.

    It will give you the best power saving capability compared with others. High-ranking inverter proficiency up to 85%.

    ZENY Arc Welding Machine

    Highlighted Features ZENY Arc Welding Machine:

    •Dual input voltage system (115V/230V).
    •Suitable for welding different materials.
    •It comes with a belt along with a handle.
    •The weight is only 18 pounds.
    •3 types of protections.
    •Higher inverter proficiency of up to 85%.

    Conclusion:
    ZENY Arc Welding Machine has got all the necessary items you need. We hope that this is one of the best 120V mig welders that will never disappoint you. 

    Things to consider before buying the best 120V Welder

    Are you still confused about which welder have to purchase? That's why I’ve made this buying guide to assist you to select the 120V welder.

    Voltage and amperage

    If you want to buy a good quality arc welder machine, you have to focus on the input voltage and the power output, which is surveyed in amperage. It alludes to the power a welder can offer.
    You can get a better power supply by 110V to 230V along with 90A to 200A.

    Safety issues

    For buying the best 120V tig welder, you have to search for those welder machines which is safer than the other. Otherwise, it may cause a serious accident which you never expect!

    These welder machines have over-pressure protection, over-current protection, over-voltage, over-heat protection, thermal overload and anti-stick protection for extreme privacy at all.

    Easy to carry

    The product should be portable. Because you may have to move the welder from here and there. If that is heavy, it can be annoying!

    Thinking of these aspects, we designed all the lightest arc welder that is simple to carry. Here we've 10.8 pounds to 18 pounds. You can choose for your satisfaction.

    Versatility

    That is one of the major points to buy the best 120V mig welder for the money. Your welder should be perfect for multi-purpose applications.

    If your welder machine is capable of welding stainless steel, mild steel, carbon or medium carbon steel, cast iron, alloy steel, and aluminum; then make sure you've got the 120V tig welder.

    Frequently Asked Questions(F.A.Q)

    Q: What are some advantages of mig welding?
    A: This technology is quicker and produces longer-lasting results than common alternatives.

    Q: For how long should I weld at a time?
    A: You need to take an interval every two hours for the reason of your security and health.

    Q: How simple is it to learn mig welding?
    A: Just you have to take a spirit to learn. Because it is one of the simple welding processes!

    Q: Which is the best welder machine for beginners?
    A: Kicking House F130 and Arc Welder Dual Voltage welder machine may be the best options if you are a beginner.

    Final words:

    Now you don't have to burn the midnight oil! Because we've discussed for the best 120V welder. It is your time to select the best one.

    You can go to others. However, if you purchase those trashes, you will end up bewailing when they will miss out on their quality after a few weeks or months!

    Otherwise, you can run for one of these welder machines and get entire time enjoyment.

    If you want to make your life easier, spending money on the thing that will not be a waste. So, go and buy the best 120V arc welder that suits you.

    Filed Under: Reviews, Welder

    Best Welder Cord Reviews 2020 – Welding Cords of the Market

    March 29, 2020 by Charles Mora Leave a Comment

    A good welding extension cord won’t only help you to work better but also saves you from big risks as well. Low-quality welder cords can’t maintain a stable voltage and that can result in the welder overheating. When overheating occurs, the machine can easily catch fire. And welder machine that comes with overheating protection they might not catch fire but still that harms the machine’s overall lifespan.

    That is exactly why you need the best welder cord. Welder cords come into different thicknesses, lengths, shapes, voltages, etc. in order to get the best out of the cord, you will have to pick the right one. Below we have aligned 3 best welder cord reviews, go through them and you will find the right one for you. 

    Top 3 Best Welder Cord Reviews

    We have found dozens of welding cord in the market and not all of them are worth trying. After going through a lot of reviews and tests, we have pulled out only 3 welding extension cord which has proven their worth over time. They are serving the users best!

    1. MaxWorks 80703 Heavy Duty Welding Cord.

    Maxworks is a well-reputed brand and they always keep their commitment to providing the customers with a good quality product. The best thing about this very brand is, they know exactly what the consumers want and they produce every product knowing that. However, like other products of this brand, the Maxworks 80703 is a top-notch welding cord.

    The manufacturer has kept the safety for the users in mind and they have made the cord as safe as possible. You will see a neon light in the cord when you see the light that means the cord is active and when the light is off, that means the cord is inactive. Plus, they have added contractor-grade STW jacket insulation that makes this cord even safer, and also helps it to perform better.

    With this wire, you get top-quality 8 AWG, 3c copper wires along with 6-50 Nema plug, and you get connector as well. For all the portable welders. In 250V the wire can deliver 40 AMPS and comes with a 50-amp plug. This 50 AMP welder extension cord is 40 feet long and that decent. 

    MaxWorks 80703 Heavy Duty Welding Cord

    Highlighted Features MaxWorks 80703:

    •The length of this cord is 40 feet.
    •It delivers 40 AMP in 250 volts.
    •It has STW jacket insulation for strength.
    •Features safety light.

    Final word:
    This Maxworks welder extension cord would be a great helping hand for every level of welders. The build-quality, performance, safety, you will get everything in it. Indeed, a good one! 

    2. Southwire 8/3 Heavy-Duty Blue Welder Extension Cord.

    You don’t need to break a bank to get this Southwire 8/3 welder extension cord, it comes with a bunch of features that make it an excellent welder cord for medium-duty welding. This wire is not suitable for heavy-duty industrial-grade welding works, it cannot take much voltage, only use this cord for light or medium-duty welding jobs. It is a highly durable cord, thanks to the top-notch jacket insulation. The top-grade jacket insulation makes the cord suitable for regular use.

    The length of this cord is 25-feet, which’s small which is why it not suitable for large workplaces. Only portable and small works this wire is perfect. If you are looking for an industrial-grade welding machine, then go for more longer and durable cords. The power rating of this wire is 40 amps in 250 volts and delivers 10,000 watts. There is a safety light as well in the cord so that you will know when the cord is active and when not. 

    Southwire Heavy-Duty Blue Welder Extension Cord.

    Highlighted features Southwire 8/3 Heavy-Duty Blue Welder Extension Cord:

    •Insulated with an 8-gauge STW jacket.
    •Safety neon light features.
    •Delivers 10 amps in 250 volts.
    •Highly durable wire.

    Final verdict:
    For light and medium-duty welding works, this Southwire 8/3 welder extension cord would be a great suit. It is a highly durable cord, though the length is a little short, for a portable welding machine, it will work just fine. 

    3. Miady 25ft 50AMP Welding Cord.

    Presenting Miady 25ft 50 AMP welding cord, it is an 8 gauge top-quality industrial NEMA 6-50 welder cord and comes with a lighted end. The lighted end tells you when the cord is active and inactive. This wire is moisture-resistant, abrasion-resistant, and is extremely durable. Like the previous models, this one also got STW jacket insulation which makes the wire incredibly durable. The length of this cord is 25 foot, that is small but the quality of this cord makes it suitable for the industrial level welding work.

    It is an ETL listed welding cord, so you don’t have to stress much about the safety features of the cord. This welding machine is compatible with a lot of welders and as mentioned before, it can tackle heavy-duty works as well. One thing we would like to clarify, if the distance between the power outlet and the machine is longer than 25 feet, then this wire wouldn’t work. You better look for something longer. 

    Miady 25ft 50AMP Welding Cord.

    Highlighted Features Miady 25ft 50AMP Welding Cord.

    •25-feet welder cord.
    •STW jacket insulation.
    •Highly durable wire.
    •The lighted end for safety.
    •Compatible with a lot of welders.

    Final Verdict:
    If you are looking for a heavy-duty welding cord, this Miady 25ft 50 AMP welding cord is the way to go. It can tackle heavy welding pretty efficiently, though the length is short, the performance is very excellent. 

    How to Choose the Best Welder Cord Reviews?

    welder extension cord might seem a very small thing but it plays a big role. When purchasing extension cords, people do not think much, they say what is there to think about. We say, there is a lot to consider if you are after picking up the best welder extension cord. There are a bunch of factors that need consideration and these will lead you to the best, have a look below!

    Copper cable.

    Cables are made of different materials, and if you want to have the best working experience then go for 6-gauge copper cable, you will love it. Copper is a top-grade material for extension cords and they are pretty durable as well. And make sure the cord has a copper conductor as well that will keep delivering consistent and stable energy. 

    Plug and safety.

    Check carefully, and make sure the extension cord comes with NEMA 6-50 plug, it is the industry standard. Now some latest extension cords come with a safety light. A light in the cord, when the light is on that tells you that the cord is active. And when off, the cord is inactive. These features make the cords very safer for you. 

    Insulation.

    The insulation is the outer cover of the extension cord. Different manufacturers use different insulation but you better look for cords that come with STW jacket insulation. However, if you don’t find STW jacket insulated cord then at least ensure that the cord is abrasion and chemical exposure-resistant.

    Length.

    The cord length will depend on your work style. If the distance is bigger, then you will be needing a longer cord. And in the short distance, you need a short cord, as simple as that. However, the decent length is 25 foot, this works for most welders. 

    Frequently Asked Questions?

    What is the best 50-amp welder extension cord?

    The Maxworks 80703 NEMA R plug welding cord is an excellent 50-amp extension cord. Durability, safety, performance, you will get everything with it. Delivers constant power so that you can work satisfying. A great extension cord of the market. 

    Why you need a 220v Welder extension cord?

    If you will be using high-amperage tools and appliances, then you will be needing a 220V welder extension cord. They come with 12-gauge insulation and excellent delivering consistent energy. That being said, due to their great functionality, they are a little expensive. 

    Which is the best 20-amp extension cord?

    Take a look at the Yellow Jacket 2991 10/3 Extra Heavy-Duty 20-Amp Premium SJTW Contractor Extension Cord. One of the top-rated extension cords of the market. It is 50 feet long, so for long-distance work, this will be a killer attachment. The quality is good and the energy supply is also pretty consistent which is something that everyone looks for. 

    Conclusion.

    A good welding extension cord is highly important if you are looking forward to work on a safe working environment. The welding performance of the machine, the overall lifespan, your working comfort, all of these depends on the quality of the welding wire. So be very wise when choosing one. Hope you have got one from our best welder cord reviews, do not forget to tell us how that goes with you. 

    Filed Under: Reviews, Welder

    • Go to page 1
    • Go to page 2
    • Go to page 3
    • Go to Next Page »

    Recent Posts

    • How to Ball Tungsten for Aluminum Welding
    • Miller Vs Lincoln Multi-Purpose Welder | Who is the Ultimate Winner?
    • What Are the Different Types of Welding and Which Is Best?
    • 10 Ways How To Use A Plasma Cutter : Complete Beginner’s Guide
    • 09 Ways How to Use Mig Welding: Complete Guide for Beginners

    Recent Guide

    5 Best Plasma Cutter Under 1000 In 2020 – Updated

    Top 3 Best Welding Rod for Cast Iron in 2020: Buyers Guide

    Hobart 210 MVP Review: Awesome MIG Welder Review In 2020

    Best 120v Welder in 2020: Reviews & Buying Guide

    Best Welder Cord Reviews 2020 – Welding Cords of the Market

    • CCPA
    • Terms of Use
    • DMCA
    • Privacy Policy
    • About
    • Contact Us

    Copyright © 2020 by The Home Cutter


    Thehomecutter.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, HomieHolds.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.